GA743 Rapier Loom - Weaving Loom

Prev

Next

GA 743 is the basic of GA 747. GA 743-180 is created to mass produce gray fabrics in economical price. This machine has a same weave quality with GA 747. However, the difference between GA 743 and GA 747 is GA 743 does not use dobby; therefore it is the right choice to produce gray fabrics.

This machine is able to produce fabrics ranging from fabrics with low construction of 68 x 64 until fabrics with high construction 120 x 90 with soft yarns. With all the choice to choose good yarns, this machine is able to reach high efficiency above 90%.

Reed width	1350 mm, 1800 mm, 2000 mm, 2300 mm, 3000 mm, 3300 mm
Opening units	Cam shedding
Crank speed	130 - 200 rpm
Electrical control	Programmable logic control, two direction operation
Number of shedding units	up to 4
Weft yarn selection	mixed weft up to 2 colours
Disc Diameter of beam	600 mm
Braking system	Electromagnetic brake
Diameter of roller full winding	300 mm, 400 mm
Motor speed	720 - 960 rpm
Motor power	1.5 KW
Operation mode	push button operation
Dimension (for 180 cm), w x d x h	4106 x 1727 x 1640 mm
Weight (for 180 cm machine)	1.600 Kg
Driving mode	single motor with triangle belt driving
Column number of dropper bars	5000
Diameter of rapier driving wheel	400 mm
Range of weft density	10 - 40 pc/cm
Diameter of emery beam	127 mm
Diameter of fabric guide roller	32 mm
Diameter of fabric wind roller	95 mm