The LR 100 Frequency Tube marking machine is the next generation of CO2 laser marking machine. The LR 100 is equipped with long life DC excited CO2 laser which has a life time of more than 35000 hours. The had high speed vibrating lens, extending focusing system, precision vertical up and down working platform which enables the machine to work on a continuous 24 hours shift.
Moreover machine utilises EZCAD marker system which enables streamlined deployment for online marking. Since the machine is controlled by the same software is used in our other marking machine, user will receives reduced complexity and costs in deploying and operating the machine.
The LR 100 is not only suitable for high-tech industry but also very capable in low-tech industry as well. This machine works well in marking electronics such as IC and printed circuit board, solar panel and also very good in marking titanium, stainless steel, wood, paper, leather, cloth, plexiglass, epoxy, acrylic, unsaturated polyester resin and other materials. In addition to mark, the machine can be used to punch holes on fabrics and leather.
The wide range of applicable materials and function enables the LR 100 used in electronics, automotive, secure printing, leather, food and beverage, clothing, electronic, communication instruments, packaging industry.
Download Brochure here.
|Type of laser||Synrad Firestar Ti|
|Marking Scope(Working area)||200x200 mm or 300x300 mm|
|Marking Depth||<2 mm|
|Min line width||0.1 mm|
|Min Character Size||0.4 mm|
|Marking Speed||<7000 mm/s|
|Repetition accuracy||±0.01 mm|
|Working voltage||AC 220 V 10 % 50Hz|
|Power requirements||1,200 W|
|Operating temperature||0-30° C|
|Software||Windows XP + EZCAD marker system|
|Cooling system||Water cooling|
Colour laser marking
Colour laser marking on stainless steel using fiber laser with 20w of power.
|LG 80||Contact||LR 30|